What is redwall detection

The heightened security that we recommend to clients for these types of sites, include 4 m high-security fences, coils of razor wire, CCTV, and floodlighting. However, it must appear secure enough to give the client peace of mind that the site is adequately protected. Getting the balance right is crucial. So, how do you balance security, acoustics and aesthetics harmoniously? Security comes first These are essential facilities and as a result, they require appropriate security investment.

Cutting corners leads to a greater long-term expense and increases the likelihood of highly disruptive attacks. Thorough technical evaluation and quality audit These bodies employ thorough technical evaluation work and rigorous quality audit processes to ensure products deliver proven levels of protection.

With untested security measures, you will not know whether a product works until an attack occurs. Specifying products accredited by established bodies removes this concern. Just as you would keep computer software and hardware updated, to provide the best level of protection for the data, physical security also needs to be well-maintained, in order to ensure it is providing optimum performance. Importance of testing physical security parameters Inspecting the fence line may seem obvious and straightforward, but it needs to be done regularly.

From our experience, this is something that is frequently overlooked. They should check the perimeter on both sides and look for any attempted breaches.

Foliage, weather conditions or topography changes can also affect security integrity. Companies should also check all fixtures and fittings, looking for damage and corrosion, and clear any litter and debris away. Accessibility When considering access control, speed gates offer an excellent solution for data centres. How quickly a gate can open and close is essential, especially when access to the site is restricted.

The consequences of access control equipment failing can be extremely serious, far over a minor irritation or inconvenience. Vehicle and pedestrian barriers, especially if automated, require special attention to maintain effective security and efficiency.

The noise created from their hour operation can be considerable. HVAC systems, event-triggered security and fire alarms, HV substations, and vehicle traffic can quickly become unbearable for residents. Secure and soundproof perimeter As well as having excellent noise-reducing properties, timber is also a robust material for security fencing So, how do you create a secure and soundproof perimeter?

Fortunately, through LPS certification and CPNI approval, it is possible to combine high-security performance and up to 28dB of noise reduction capabilities. As well as having excellent noise-reducing properties, timber is also a robust material for security fencing. Seamlessly locking thick timber boards create a flat face, making climbing difficult and the solid boards prevent lines of sight into the facility.

For extra protection, steel mesh can either be added to one side of the fence or sandwiched between the timber boards, making it extremely difficult to break through.

Better protected The value of data cannot be overstated. A breach can have severe consequences for public safety and the economy, leading to serious national security implications. Countering varied security threats Data centres are faced with an incredibly diverse range of threats, including activism, sabotage, trespass, and terrorism on a daily basis.

By working with government bodies such as the CPNI and certification boards like the LPCB, specifiers can access a vault of useful knowledge and advice. Enclosures containing electronics, communications or cabling infrastructure offer a simple attack point for cyber breaches and an opportunity for a physical attack on the hardware.

Yet, many of these assets are housed within enclosures that provide minimal security features to offer a deterrent to any would-be attacker. This has always just been a pet hate. Walking down the high street of a town anywhere in the United Kingdom, you can often see open street communication cabinets. You can actually look directly inside at the equipment. And if I was a bad guy, I could quite easily just put my foot into their enclosure and quite quickly take out their infrastructure.

Moreover, the operators of these systems, whether it is telecoms or internet providers, are providing a charged service to their customers, so they should really be protecting their enclosures. Looking through the plate, the sensor should be adjusted to ensure that it is grounded at the maximum detection distance. For instance, for a SIP, the sensor should be grounded not directed towards the sky at feet.

Additionally, it is best to avoid having the detection area right at the edge of the security area, rather it is best practice to leave 3 feet either side. If the detection area is 65 feet wide, it is better to center the view at 36 feet from the edge on either side. If required, masking sticks can be used to mask part of the detection area. Watch our video tutorial.

Because onsite guards are not required, remote video response is an advanced but more cost-effective security solution than local video response.

For this reason, it is used at present for protection in more than 20, sites in the United Kingdom. Synchronization of detectors and CCTV cameras is crucial for both local video response and remote video response. In addition, the detectors must be matched with the cameras to provide reliable operation with minimal false alarms to handle numerous potential causes of false alarms, such as small animals, heavy rain, sunshine, and plants.

Easy installation and adjustment can with setting up the detectors and cameras properly. With its high-reliability detection technology, REDWALL is well known as the leading brand of external detectors for remote video response applications in the UK and provides the optimal solutions worldwide for video surveillance needs.

Photoelectric Detectors. PIR Detectors. This website operated by Optex Co. The independent detection zones can activate a number of events such as camera pre-set position to provide the visual verification or voice warning to deter intruders to go any further.

External sensors can be subject to considerable environmental changes that can affect performance. The Redwall SIP series automatically adjusts the sensitivity to adapt to the temperature and ambient lighting.

The sensitivity can also be configured independently for the near and far zones, the level of detection can be adjusted depending on the intensity of the threat. The stability of the sensors has helped provide thousands of sites with a secure and effective security system, that can be easily monitored locally or via a remote video monitoring centre.

It allows the intrusion alarm management and visual verification to be centralised. By subscribing you acknowledge that OPTEX Group companies will store your submitted information and send news and company updates to you by email.